Add tuning or clock dial light to your vintage radio! Stays on all the time! 50,000 lifetime hours!
-Electronic upgrades for white LED light socket to be powered by clock internal power source
-T11 6.3 Watt LED bulb
-Internal mounted light socket and wiring connection
LED Color: HID White (6000K-6500K), Dimension: Dimension: 10mm X 29mm (0.39" x 1.14"), Life time: Up to 50K+ hours.
LEAD TIME: Please allow 1-2 weeks turnaround time for upgrades. Please allow 3-4 weeks turnaround time during the holiday season.
-These LED lights are generally available on Amazon, Home Depot, and Lowes.
Back when these radios were new, lighted clocks were a rarity. Almost all clock designs were not visible in the dark. Yes, it's true. It's hard to imagine now with LED lighting that there was a time when all light bulbs were incandescent filament-based light bulbs. All filament bulbs generate light from a glowing wire that has current going through it. The filament eventually burns out and had to be replaced.
There were only a handful of lighted clocks that stayed lit all the time. The reason is because consumers would need to replace the bulb in their clock every few weeks or months since it was likely to be plugged in all the time. To avoid this constant bulb replacement, manufacturers opted not to have lighted clock dials.
Radio dials were lighted only when it was turned on. Presumably, users would not have their radios turned on for 24/7.
Some manufacturers chose to work around this issue by offering phosphorescent glowing clock faces, clock arms or both. The difficult was, glowing clock components were not as bright as illuminated clocks.
Even fewer manufacturers chose gas bulbs which were effective but expensive. Also, gas bulbs illuminated orange not white and were not consumer serviceable.
Yes, this upgrade will affect the clock radio originality. But, the light and light socket harness is a completely upgrade. Can easily be removed without affecting the originality of the vintage clock radio
There are no risks due to heat compared with incandescent bulbs. LED lights generate very little heat. As a result, risk of heat cracks is minimal.